9 Crucial things to know about commercial land development and permitting process
When anticipating a construction project, the land development and permitting process can be difficult to understand and confusing to navigate. With over twenty years of experience in this area, Maxx Designers & Maxx Builders shares some tips and valuable resources for building owners
1. THE LAND DEVELOPMENT PROCESS IS OFTEN LENGTHY
A critical piece of knowledge for anyone considering a new construction project or major addition/renovation is that the process of meeting land development requirements is often a lengthy one. Unfortunately, we have seen seemingly straightforward projects take anywhere between six months to a year. There are many factors at play of course, with ground-up new projects anticipating a lengthier approval process than simple additions or renovations. Special restrictions, such as building on a wetland or state road, could also increase the length of time significantly. Be sure to start land development early to allow ample time.
2. MAKE SURE YOUR LOCATION IS ZONED PROPERLY
Zoning depends on the type of structure you are building. Sometimes zoning is easy and straightforward; while in other situations you may need to re-zone your property. Certain zoning districts can impose additional requirements and may necessitate special approvals. Additionally, if you find yourself in a re-zoning situation, be aware that neighbor input will be considered— something that many people are unaware of.
3. FIND OUT ABOUT THE ROCKS
When designing the structure of the building, soil probes will need to be used around the building site and evaluated by a geo-technician to determine the bearing capacity of the soil. This information can provide insight as to how much rock you may encounter during construction. Unknown rock can become a very costly expense for project Owners, so a geo-technician’s report can be a very important early tool.
4. PERMITTING REQUIREMENTS MAY NOT BE EASY TO MANEUVER
Often, each phase of your project requires separate permitting—land development, demolition, building, plumbing, mechanical, electrical, fire protection, etc. Each local authority has its own way of administering the process of the Uniform Construction Code. Some will require a permit review upfront, and then ask you to pay a fee before you pick up the permit. Others may require you to pay the permit (or a portion thereof) upfront when submitting for review.
Most authorities will require original stamped drawings, while others may accept copies. It is key to know who the governing authority is for the area in which you want to build and find an outline of the process for that agency. This can often be obtained on their websites or by directly contacting each authority. Lastly, be aware that on rare occasions when a property or building is in multiple areas, you may have to deal with two or three authorities—multiplying the amount of work needed to get approvals.
5. CONSIDER HOW YOU ARE GOING TO TIE-IN TO YOUR UTILITIES
If you have access to public water and sewer, make sure you have adequate space to tie into those utilities and a suitable water supply for what you need. This can sometimes be a stumbling block or cause additional cost to a project if not thought out in advance of the project’s start. You may also be required to have a water flow test completed to determine an adequate supply for fire protection.
6. GET EVERYTHING IN ORDER FOR DEPARTMENT OF HEALTH REVIEWS
Many types of facilities—including home healthcare, nursing homes, and surgical care centers, to name a few—need to be reviewed by the Department of Health. Drawings will need to be submitted, with the opportunity to review the plans together. At the completion of your project, you will need an inspection through them, in addition to your normal building inspections. Each state has their own way of handling approvals, with detailed websites available as a resource in most states.
7. WATCH OUT FOR MUNICIPALITY-SPECIFIC AMENDMENTS
As stated before, each local municipality in Texas is required to adopt the Uniform Construction Code; however, some municipalities adopt their own amendments that can add to the code requirements. In fact, the Uniform Building Code has a commentary that is just as thick as the code itself—no kidding! While this often helps better understand the code, it still does not make every area of the code perfectly clear. Furthermore, not every project falls neatly into how it is described in the code.
8. HAVE YOUR CONSTRUCTION PARTNER INVOLVED EARLY IN THE PROCESS
Many of the above-mentioned pieces of advice are timely and need to be addressed and adequately planned for at an early stage in your project. While it is never “too late” to get a construction partner involved, it will be in your best interest to have your partner involved as early in the planning stages as you feel comfortable. This enables your construction partner to anticipate and address the specific needs of your project efficiently and in a timely manner.
10. MAKE SURE YOU PARTNER WITH SOMEONE
Who Advocates for the Owner With Maxx Design-Build Process, the owner benefits from the most cost-effective finished product because Horst is able to advocate for the owner from day one. It is critical to choose a partner who has ample resources and opportunities to evaluate the different angles of your project and ensure your finished product is everything you hoped for. Maxx Designers can use their own experience, plus that of the in-house project architect, to make sure as many issu
es as possible are accounted for before submitting drawings.
Educating yourself on construction-related issues is a great way to start off your project correctly and set it up for success. By aligning yourself with a professional firm that is dedicated to understanding not only what your vision and needs are for your building, but also the ins and outs of these and other possible stumbling blocks, you can rest easier and watch things fall into place.